(0)
£0.00 inc. VAT
Jamestown Metal Limited Code 4 Lead Flashing Rolls, 150- 900mm Width, 1m, 3m and 6m
Hover over image to zoom.

Jamestown Metal Limited Code 4 Lead Flashing Rolls, 150- 900mm Width, 1m, 3m and 6m

code: n/a
From £49.99 inc. VAT (Delivery from £2.99 inc. VAT )
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Code 4 Lead Flashing Rolls, 150- 900mm Width, 1m, 3m and 6m 

Lead Sheet for roofing and weathering has been produced by the rolling method since the mid 1970's, meaning centuries of use have proven the longevity of the product. Rolled Lead sheet is formed by passing a slab of refined lead back and forth on a rolling mill between closing rollers, reducing the thickness of the slab. All controlled by computer to obtain an exact predetermined thickness. The sheet is then slit into width and cut to length for final packing and distribution.

Rolled lead conforms to European manufacturing standard BSEN 12588:2006 which specifies thickness tolerances and chemical composition in order to produce a consistent microstructure. The consistency of this process is such that rolled lead will not vary in thickness by more than +-5%. The exacting tolerance of this standard ensures that when lead sheet is fitted to a roof, the extent of thermal movement can be accurately predicted and the correct fixing method adopted. Rolled lead is fully recycable.

Code 4 Lead Flashing Rolls, 150- 900mm Width, 1m, 3m and 6m 

Lead Sheet for roofing and weathering has been produced by the rolling method since the mid 1970's, meaning centuries of use have proven the longevity of the product. Rolled Lead sheet is formed by passing a slab of refined lead back and forth on a rolling mill between closing rollers, reducing the thickness of the slab. All controlled by computer to obtain an exact predetermined thickness. The sheet is then slit into width and cut to length for final packing and distribution.

Rolled lead conforms to European manufacturing standard BSEN 12588:2006 which specifies thickness tolerances and chemical composition in order to produce a consistent microstructure. The consistency of this process is such that rolled lead will not vary in thickness by more than +-5%. The exacting tolerance of this standard ensures that when lead sheet is fitted to a roof, the extent of thermal movement can be accurately predicted and the correct fixing method adopted. Rolled lead is fully recycable.

Code 4 Lead Rolls can be used for a wide range of purposes and applications including the following: 
  • Apron and cover flashing 
  • Bay tops and canopies 
  • Chimney flashing
  • Conservatory step flashing/ soakers
  • Gutters   
  • Hip and Ridge Flashing 
  • Lead Slates 
  • Pitched Valley Gutters 
  • Soakers
  • Vertical Cladding
  • Weathering to Cornices, Parapets, Etc  
Be the first to review Jamestown Metal Limited Code 4 Lead Flashing Rolls, 150- 900mm Width, 1m, 3m and 6m . Write a review ›
Jamestown Metal Limited