(0)
£0.00 inc. VAT
Simpson Strong Tie Simpson Strong-Tie Crocodile Wall Starter Kit (Stainless Steel)
Hover over image to zoom.

Simpson Strong Tie Simpson Strong-Tie Crocodile Wall Starter Kit (Stainless Steel)

code: n/a
From £6.99 inc. VAT (Delivery from £1.99 inc. VAT )
Was: £8.99 inc. VAT You Save: £2.00 inc. VAT (22%)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • Simpson Strong-Tie Crocodile Stainless Steel Wall Extension Profiles.
  • Universal Wall Starter Kit / Wall Extension Profiles
  • Wall heights up to 2.4m per pack.
  • Masonry widths 60mm to 250mm BBA Approved for up to 8m.
  • Unique built in ties simply "snap out" of the profile.
  • Fully adjustable for easy positioning.
  • Just slide and fit ties for easy and accurate alignment.
  • Fixing and instructions included.
  • Available as 1 Single Tie or 10pk
  • Simpson Strong-Tie Crocodile Stainless Steel Wall Extension Profiles.
  • Universal Wall Starter Kit / Wall Extension Profiles
  • Wall heights up to 2.4m per pack.
  • Masonry widths 60mm to 250mm BBA Approved for up to 8m.
  • Unique built in ties simply "snap out" of the profile.
  • Fully adjustable for easy positioning.
  • Just slide and fit ties for easy and accurate alignment.
  • Fixing and instructions included.
  • CONTENTS:
  • 2 x 1.1m Profiles.
  • 10 x "Snap Out" Ties
  • 6 x Fixing Sets.
  • ORDER CODE: C2KS.
  • FIXING INSTRUCTIONS
  • Ensure existing wall is sound and clean to ensure connector has direct contact with existing masonry.
  • Locate the first channel above DPC level at centre point of the new masonry to be constructed.
  • Plumb the section marking the fixing holes, then drill and plug the existing wall.
  • Lightly screw the first channel then slot the upper channel into the lower section and plumb mark and drill the remaining fixing points.
  • Align both connectors then tighten all coach fixing screws.
  • Lay bricks or blocks for the new wall in conventional way. Be sure to bed them with mortar against the starter.
  • Install the turn and slide ties into the channel, spacing them at 300mm centres. The ties should be completely surrounded with mortar.


  • IMPORTANT NOTES
  • For cavity wall construction, each leaf of the new wall requires a Trade Start wall connector.
  • For external application ensure the bottom edge of the channel is placed above existing DPC level.
  • The vertical joint between the existing wall and new walls must be completely weather sealed.
Be the first to review Simpson Strong Tie Simpson Strong-Tie Crocodile Wall Starter Kit (Stainless Steel) . Write a review ›

Delivery is at a scaled rate for UK, Ireland and Offshore Islands, etc.

For online orders that total over £100 the delivery charge will be free*.

For online orders under £100 the delivery charge will be calculated by the weight of the product(s).

Depending on the goods ordered, highlands and islands may incur an additional delivery charge.

Delivery to UK Mainland 

  • 0.10Kg - 1Kg = £1.99
  • 1.01Kg - 2Kg = £2.99
  • 2.01Kg - 3Kg = £3.99
  • 3.01Kg - 4Kg = £4.99
  • 4.01Kg - 5Kg = £5.99
  • 5.01Kg - 6kg = £6.99
  • 6.01Kg - 7kg = £7.99
  • 7.01Kg - 8kg = £8.99
  • 8.01Kg - 9kg = £9.99
  • 9.01Kg - 10kg = £10.99
  • 10.01Kg - 15kg = £12.99
  • 15.01Kg - 20kg = £15.99
  • 20.01kg - 25kg = £19.99
  • 25Kg+ prices on request

Delivery to Northern Ireland

  • 0.01Kg – 1.0 Kg = £1.99
  • 1.01Kg - 9.99Kg = £2.99
  • 10.00Kg - 23.00Kg = £4.99
  • 30kg+ = Price on request

Delivery to the Republic of Ireland

  •  Price on request

Channel Islands Isle of Man, Shetland and Scottish Highlands and Islands contact us for rates

 

 

 * Certain items such as Coal Bunkers will incur a pallet charge, please contact us for a quote

Simpson Strong Tie