£0.00 inc. VAT
K Rend Alkali Resistant Reinforcing Mesh
Hover over image to zoom.

K Rend Alkali Resistant Reinforcing Mesh

Now £90.00 inc. VAT (FREE UK Delivery*)
Was: £93.99 inc. VAT You Save: £3.99 inc. VAT (4%)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Alkali Resistant Reinforcing Mesh

Provides high strength, good cohesion, excellent coating and is widely used to reinforce walls. It can also be used to reinforce cement and plastic making it an ideal construction material.

(50m roll) is used to reduce the build up of stress at typical stress points in the building, thus minimising the potential for cracking.

- Used to reinforce the basecoat

- Simple to install

- Used with all K Rend one-coat renders

- Alkali resistant

- Improves crack resistance

- Helps accommodate building movement

- Improves impact resistance



- Must be used for product/ system warranty.


100% virgin polypropylene woven fabric, containing no re-processed solfin materials and specifically manufactured for use as a reinforcing fabric. For use in any Portland cement, acrylic or latex based stucco, mortar or surfacing material. Applicable as non-metallic fabric mesh in UL P-900 rod and joist roof-ceiling designs.

The fabric must be engineered and designed to reinforce the base coat, help bind the substrate and base coats together, inhibit damage due to temperature related building movement and give surfacing systems increased impact resistance.

Fabric must be certified to meet or exceed the following standards based on the appropriate ASTM Test Methods:

Typical Properties

Construction ASTM D-3775 4.7 x 2.2 strands/cm

Thickness ASTM D-1777 1.14mm

Opening Size (Warp x Weft) Measured 4.0mm x 4.3mm

Tensile Strength ASTM D-1682 450 x 375N/50mm

Elongation at break ASTM D-1682 25% x 40%

Burst Strength (Mullens) ASTM D-3786 760 kPa.

Flame Spread Index ASTM E-84 10

Weight/Square Metre ASTM D-3776 87.9gm/sq m

Width ASTM D-3774 1.0m

Length ASTM D-3774 53.0m

Stiffness ASTM D-1388 3800mg/cm 

Be the first to review K Rend Alkali Resistant Reinforcing Mesh. Write a review ›
K Rend