-
- Change Currency
- € - Euro
- £ - British Sterling
| (0) |
£0.00
€0,00
£0.00
€0,00
ex. VAT
ex. VAT
inc. VAT
inc. VAT
|
- Outdoor
- Building Materials
- Tools
- Fixings
- Workwear
- Hardware
- Household
- Brands
Home › Building Materials › Simpson Strong Tie › Simpson Strong Tie Light Duty Restraint Strap 900x2.5mm 10Pack
Simpson Strong Tie Light Duty Restraint Strap 900x2.5mm 10Pack
code: ACCU57052Restraint Strap - H and L straps are designed to The Building Regulations, BS 5268 Part 3 and other building standards for vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
Light Duty restraint straps are designed for vertical loads such as wall plates on top of masonry walls
Size: 900mm x 2.5mm
Restraint Strap - H and L straps are designed to The Building Regulations, BS 5268 Part 3 and other building standards for vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
Light Duty restraint straps are designed for vertical loads such as wall plates on top of masonry walls
Size: 900mm x 2.5mm
Installation
- Use all specified fasteners.
- Horizontal lateral restraint straps should be spaced not more than 2m centres and attached to at least 3 timber members through the use of noggings and packing.
- Attach to timber members using specified fasteners. The bend length should be a minimum of 100mm and should be positioned at the centre of an uncut block or brick.
- Vertical restraint strapping should be at least 1m long.
- Where straps are fixed to masonry, hardened nails Ø4mm x 75mm long or wood screws into plastic plugs Ø5.5 x 50mm long should be used. The lowest fixing should be located within 150mm of the bottom of the vertical strap.
