BMK MAXI FLEX - Spiral Hose Pipe for Ventilation of Soil, Waste and Mechanical Systems

MAXIFLEX is a fully flexible spiral hose for the ventilation of soil and waste piping and mechanical ventilation systems. It is made from a double coated polyamide fabric with welded steel wire, with connection sleeves at both ends. It is also available with a reducer fitted at the lower end with a 70/100m spigot

The small spiral spacing makes MAXIFLEX highly versatile for bending through difficult double bends.

The multiple slits in the connector makes it adaptable to small differences in pipe sizes.

The pipes should always be installed in such a way as to avoid the possibility of any condensate

collecting inside it. The supplied rubber sealing bands should be fitted over the end of the pipe(s)

being inserted into the connector(s).

To avoid condensation build up, it is recommended to protect piping with insulation above the level of installed ceiling insulation.

INDOOR USE ONLY

Technical Specifications:

Socket Material: ABS (Acrylonitrile butadiene styrene)

Tube Material: Polyamide fabric, coated both sides, with welded steel spiral wire

Wall thickness of the tube: approximately 0.25 mm

Temperature range: - 20 ° C to + 80 ° C

Maximum operating pressure: + 3000 Pa

Maximum air speed: 30m /s

Wire spacing: 25 mm

Minimum bending radius: 0.62 x Ø

Standard length: 60 cm (other lengths to order)

Color Connection sleeve and reducer Orange

Color tube: Grey

Supplied ancillaries Aluminium clamp with worm drive, rubber sealing bands