(0)
£0.00 inc. VAT
Everbuild Fire Foam Gun Grade B2 - 750ml
Hover over image to zoom.

Everbuild Everbuild Fire Foam Gun Grade B2 - 750ml

code: FOAM0016A
£18.99 inc. VAT (FREE UK Delivery*)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

EVERBUILD FIREFOAM B2 HANDHELD is a quick setting one part polyurethane foam with fire resistance properties.

The foam expands on application to up to 50 times its original volume and meets the requirements of DIN 4102 Part 1 for Construction Materials and BS476 Part 20. Fire rated up to 2 hours in certain joint configurations. Copies of the independent test certificate, Warrington fire report number 160902 are available on request.Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +25oC, ideally 20oC.

EVERBUILD FIREFOAM B2 HANDHELD is a quick setting one part polyurethane foam with fire resistance properties.

The foam expands on application to up to 50 times its original volume and meets the requirements of DIN 4102 Part 1 for Construction Materials and BS476 Part 20. Fire rated up to 2 hours in certain joint configurations. Copies of the independent test certificate, Warrington fire report number 160902 are available on request.Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +25oC, ideally 20oC.

Benefits High degree of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades

Quick setting - can be cut, sawn or plastered in 1 hour.

Economical in use - expands up to 50 times its original volume.

Fills irregular and broad gaps where most conventional fillers would fail.

Possesses insulating and sound deadening properties.

Areas for Use Filling Gaps around pipe entries through fire rated walls

To provide a fire rated seal around window and door frames

Electrical wire chasing prior to plastering, where a fire rating is required.

Deep joints prior to applying sealant or plaster irregular gaps in stone, brick, concrete or plaster

Fixing Door frames

Timber structures

Windowsills and thresholds

Window frames

Insulating

Behind cladding to exterior walls.

Behind soffit and barge boards

In automotive applications.

When used as part of a fire rated joint, use in conjunction with EVERFLEX FIREMATE intumescent sealant for maximum fire rating.

Surface Preparation Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

Be the first to review Everbuild Fire Foam Gun Grade B2 - 750ml. Write a review ›
Everbuild