|
(0) |
£0.00
€0,00
£0.00
€0,00
ex. VAT
ex. VAT
inc. VAT
inc. VAT
|
Home › Hardware › Sealants and Adhesives › HB42 › HB42 Black Sealant and Adhesive All in One 290ml
HB42 SEALANT & ADHESIVE / Black, 290ml cartridge
Sealant & Adhesive
Interior & Exterior Works in wet Flexible (Non shrinking)
Durable Can be over-painted Solvent free
Suitable as mirror adhesive Bonds to almost anything (incl. lead)
Odourless EC1 plus rated, very low VOC’s. Food safe Conforms to EN 15651-1 & EN 15661-4 Conforms to INS PI No: 1806068 f or materials intended to come into contact with food. GEV Approved no: 8835/13.11.12: EC1Plus Classification for very low emissions Hilton Banks Ltd: GEV Member OM-088
Uses:
Sealing joints around sanitary fixtures Sealing joints around windows & doors (can be over-painted) Weatherproofing joints For use in glazing systems
Fixing skirting, panels, windows, thresholds, insulation materials
Fixing mirrors Seals & bonds glass Bonds & seals wood, stainless steel, aluminium, porcelain, UPVC, coated metal, polystyrene
May be used safely in food preparation areas
Application:
Ensure surfaces are clean & dust free. Cut the cartridge seal and screw on the nozzle, having cut to required size. Using a skeleton gun, apply sealant into the gap or joint to provide a good solid fill. If GEV EC1 Plus Approved HB42 Sealant & Adhesive Page - 2 required place masking tape along the edges, removing within 10 minutes of application. Use a sealant finishing tool or a stick wetted with soapy water to achieve smooth finish. For bonding applications, apply in vertical lines at a distance of 30cm. Support the application for 24 hours until full curing occurs. If painting, use a water-based paint.
HB42 SEALANT & ADHESIVE /Black, 290ml cartridge
Sealant & Adhesive
Interior & Exterior Works in wet Flexible (Non shrinking)
Durable Can be over-painted Solvent free
Suitable as mirror adhesive Bonds to almost anything (incl. lead)
Odourless EC1 plus rated, very low VOC’s. Food safe Conforms to EN 15651-1 & EN 15661-4 Conforms to INS PI No: 1806068 f or materials intended to come into contact with food. GEV Approved no: 8835/13.11.12: EC1Plus Classification for very low emissions Hilton Banks Ltd: GEV Member OM-088
Uses:
Sealing joints around sanitary fixtures Sealing joints around windows & doors (can be over-painted) Weatherproofing joints For use in glazing systems
Fixing skirting, panels, windows, thresholds, insulation materials
Fixing mirrors Seals & bonds glass Bonds & seals wood, stainless steel, aluminium, porcelain, UPVC, coated metal, polystyrene
May be used safely in food preparation areas
Application:
Ensure surfaces are clean & dust free. Cut the cartridge seal and screw on the nozzle, having cut to required size. Using a skeleton gun, apply sealant into the gap or joint to provide a good solid fill. If GEV EC1 Plus Approved HB42 Sealant & Adhesive Page - 2 required place masking tape along the edges, removing within 10 minutes of application. Use a sealant finishing tool or a stick wetted with soapy water to achieve smooth finish. For bonding applications, apply in vertical lines at a distance of 30cm. Support the application for 24 hours until full curing occurs. If painting, use a water-based paint.